Skip to content
Free Shipping on All Orders
Free Shipping on All Orders

Dual Head Air Chuck Inflator Gauge

10 to 160 pounds per square inch
¼ NPT Inlet
Full swivel dual head
Meets OSHA compliance 1910.177

Milton® is well known for inflator gauges. This dual head straight foot chuck inflator gauge is made with heavy duty construction and includes a magnifying window lens. At 15 feet in length, the hose meets OSHA requirements. This tire inflator gauge offers a full swivel chuck, allowing for easy access to inner duals. Reading in both PSI, the pressure range for this inflator gauge is 10-160 PSI. 1/4" NPT air inlet.



INSTRUCTIONS FOR USE:

If using a dual head type tire chuck with an inflator gauge and notice air is escaping through the off-side once connected to the tire’s Schrader valve, simply release the trigger and remove the inflator from the Schrader/tire valve. Point the straight side of the outlet up into the air (make sure it’s not pointed at someone). Squeeze trigger, allow air to flow (gravity will cause the sealing valve to drop), and place the chuck end onto the Schrader/tire valve while air is still flowing. Air will start to flow into the tire.

Dual head type tire chucks are unable to inflate a completely flat (zero air pressure) tire. Tire air pressure would normally cause the sealing valve to move and seal the unused side of the chuck. However, if a tire has 0 air pressure, the self-sealing valve has no pressure to react to.