ADDITIONAL INFORMATION:
DESCRIPTION
The Husky 716 air operated diaphragm pump features aluminum construction and an external controller for remote control capabilities.
FEATURES:
- Aluminum/Buna N
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
ADDITIONAL INFORMATION
| Weight | 8.5 lbs |
|---|---|
| Air Pressure Operating Range |
30-100 psi (7 bar) |
| Maximum Air Consumption |
28 scfm |
| Maximum Free-flow delivery |
16 gpm (61 lpm) |
| Typical Application |
Oil Transfer |
| Air Inlet NPT |
1/2 |
| Air Exhaust Port |
3/8 npt(f) |
| Fluid Inlet / Outlet |
3/4 npt(f) |
| Air Valve Replacement Kit |
241657 |
| Kits (Seats, Balls, Diaphragms) |
D05277 |
| Diaphragm Kit |
D05007 |
| Manual |
308573 |
| Instruction Manual |
308573 and 308981 |
| Maximum Fluid Working Pressure |
100 psi |
| Maximum Pump Speed |
400 cpm |
| Gallons per cycle |
.4 |
| Maximum Suction Lift (water with buna balls) |
15 ft dry, 25 ft wet |
| Maximum Size Pumpable Solids |
3/32 in |
| Minimum Operating Temperature |
40 °F |
| Maximum Operating Temperature |
225 °F |
| Sound Power Level (measured per ISO standard 9614-2) |
77 dB(A) – At 70 psi (4.8 bar, 0.48 MPa) at 50 cycles per minute |
| Sound Pressure Level (measured 1 m from pump) |
67 dB(A) – At 70 psi (4.8 bar, 0.48 MPa) at 50 cycles per minute |
| Wetted Parts |
aluminum, stainless steel, PTFE, zinc-plated steel |
| Non-wetted External Parts |
Polypropylene, stainless steel, polyester (labels), nickel-plated brass, epoxy-coated steel (feet) |
| Manufacturer Part Number |
241906 |
