Skip to content
Free Shipping on All Orders
Free Shipping on All Orders

Alemite oil mist systems are used to service all types of machine elements that require continuous lubrication, such as rolling element bearings and chain drives. These reliable systems have no moving parts, deliver a constant, measured stream of clean, atomized oil and are a cost-effective option for ongoing automatic lubrication

OIL-MIST SYSTEM COMPONENTS

SPRAY NOZZLE FITTINGS

Like spray fittings, spray nozzle fittings convert mist into a wetter spray. Whenever the required mist flow exceeds the capacity of the maximum spray fitting size, spray nozzle fittings are used. Spray nozzle fittings contain from 1 to 14 flow holes. Each hole passes the same amount of mist as the largest spray fitting. One end threaded fittings are usually installed from inside a very large bearing housing and have a tightening slot on the opposite end. Fittings are brass.

One end threaded Both ends threaded Number of orifices Total flow area
(square inch)		 CFM @ 20 in. H20
1/2" NPTF(m) 3/4" NPTF(m) 1/4" NPTF(m) 1/2" PTF(m)
326370-1 383588-1 384280-1 1 0.00352 0.3
326370-2 383588-2* 384280-2 2 0.00704 0.6
326370-3 383588-3* 384280-3 3 0.01056 0.9
326370-4 383588-4* 384280-4 4 0.01408 1.2
326370-5 383588-5* 384280-5 5 0.01760 1.5
326370-6 383588-6* 384280-6 6 0.02112 1.8
326370-7 383588-7* 384280-7 7 0.02464 2.2
326370-8 384280-8 8 0.02816 2.5
326370-9 384280-9 9 0.03168 2.8
326370-10 383617-10 384280-10 10 0.03520 3.1
383617-11 11 0.03872 3.4
383617-12 12 0.04224 3.7
383617-13 13 0.04576 4.0
383617-14 14 0.04928 4.3